Commercial Window Cleaning
Shopfronts, offices, cafes, wineries and other commercial glass across the Peninsula, cleaned on a one-off or regular schedule.
Learn More →
Solar panels cleaned of salt, dust, pollen and bird droppings that build up on coastal roofs.
Request a Free Quote
Solar panels on the Mornington Peninsula pick up a mix you won't see on inland roofs. Near the bay and ocean, a dull salt film builds up on the glass. Further inland around Red Hill and Main Ridge, it's more likely to be farm dust and spring pollen. Add seagull droppings, tea tree litter and pine needles, and your panels can end up covered in grime that blocks sunlight. We clean them with purified water and soft-bristle brushes on water-fed poles. Purified water dries without leaving mineral spots, so we don't need detergents or harsh chemicals on the glass.
Our changeable weather doesn't clean panels the way many people expect. A light shower wets the dust, then the water runs to the bottom edge of each panel and dries there. Over time that leaves a muddy line along the frame. Panels on low-pitched roofs collect the most dirt. Bird droppings and lichen can also stick to the glass, and rain alone won't shift them. We work the brush gently across the whole surface, pay extra attention to the bottom edges and frames, then rinse everything off with clean purified water.
We schedule the work for when the panels are cooler, usually early morning or later in the day, and we keep pressure washers away from the panels. Where we can reach the array from the ground or a ladder, we do. When the roof needs to be accessed, we set up fall protection that suits the roof. Most panels are fitted on the same roof as your gutters, so many customers book gutter cleaning in the same visit. For two-storey homes with tall view windows, our high and hard-to-reach window cleaning team can take care of the upstairs glass while we're there.
From the first roof check to the final purified water rinse, here's what happens on your roof.
We start by looking at the roof pitch, how the panels are mounted and the safest way to reach them. We check the glass for cracks, scorched spots or chipped frames and point out anything we find before we start. If your installer or the panel manufacturer has published cleaning guidance, we follow it.
Next, we remove leaves, pine needles and sticks from the panels and from the gaps along the frames. If we left this material on the glass, it would turn into a sludge once wet. Clearing it first also lets us spot any debris trapped under the edges of the array.
We work across each panel with a soft-bristle brush fed with purified water. We give extra time to the salt film, bird droppings and the muddy line along the bottom edge. We don't use detergents or high pressure, so the glass and seals aren't put under any strain.
We finish with a clean rinse of purified water. It runs off the glass and dries clear, without leaving streaks or mineral marks. Once the panels are done, we tell you what we noticed, such as birds nesting under the array or a chipped frame, so you can raise it with your installer if needed.
Clearer glass, less stubborn build-up and a better view of what's happening on your roof.
Salt film, pollen and droppings all block light from reaching the cells under the glass. Once they're removed, your panels can work with the sunlight they actually receive. Many owners check their monitoring app before and after a clean to see how their system is performing.
If bird droppings and lichen are left on the panels through a warm summer, they're much harder to remove. Regular cleaning removes them before they get that far. This means less hard scrubbing over the life of your panels.
Most people never get a close look at their own roof. During every clean, we check for cracked glass, nesting birds and debris trapped under the array. That gives you time to deal with small problems before they become bigger ones.
We clean windows and glass balustrades across the peninsula every week, so we know how quickly salt film forms near the bay and ocean. Solar panel glass picks up the same film. We use the same purified water approach that keeps view windows clear.
We use purified water, soft-bristle brushes and no pressure washers or degreasers on the panels. That protects the anti-reflective coating and the frame seals. We also clean when the panels are cooler, so the water doesn't dry too fast and leave spots.
We look at every roof before we access it and set up fall protection that suits the pitch and height. We don't walk on the panels. Where the array can be reached safely from a ladder or the ground, that's how we clean it.
Once we're set up on your roof, it makes sense to clear the gutters and clean the upstairs glass during the same visit. That's especially handy for holiday homes and short-stay properties with tight turnovers. You only have to book once, and the whole job gets done in a single trip.
Common questions answered
It depends on where your home is and what's around it. Homes close to the water collect salt faster. Properties near tall trees or in farming areas get more leaves, dust and pollen, and low-tilt panels hold more grime along the bottom edge. A good guide is to clean when your monitoring app shows output falling more than the season would explain, or when you can see a film or droppings on the glass.
Heavy rain can rinse off some loose dust, but light showers often make the problem worse. The water carries the dirt down to the bottom edge, where it dries into a muddy line. Rain also won't shift dried bird droppings, lichen or a well-set salt film.
The main factors are how many panels you have, how high and steep the roof is, how easy it is to reach the panels, and how dirty they are. A single-storey array we can reach from a ladder is a simpler job than a steep two-storey roof that needs fall protection. Send us a few details or photos and we'll give you a quote.
We use purified water, soft brushes and no pressure washers or harsh chemicals. That's the gentle method most panel makers recommend. The warranty terms belong to your panel manufacturer and installer, so check their cleaning guidance. We're happy to follow any specific instructions they provide.
Yes, as long as we can safely reach the roof and you've arranged access to any locked side gates. Many Sorrento, Rye and Flinders owners book panels, gutters and windows together before the summer rush. We'll let you know how the job went and point out anything we noticed on the roof.
We provide Solar Panel Cleaning throughout the Mornington Peninsula, VIC and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas